Heatex offers a broad range of rotary heat exchangers spanning applications from small residential installations up to large commercial installations. Rotary heat exchangers are often the preferred choice thanks to the low freezing risk as the wheels by definition defrost themselves, their compact size and the high sensible efficiency that they provide.
The possibility of adding coating to the wheel, which allows latent transfer, is another factor favoring these products.
Heatex rotary heat exchangers can be equipped with a purge sector in order to minimize the cross contamination of fresh air with exhaust air.
ROTARY WHEEL HEAT EXCHANGER
MODEL – E
Model E is a high-performing and lightweight rotary heat exchanger designed for air handling units, primarily for comfort ventilation applications. Typical temperature efficiencies are up to 90%.
Model E offers one of the most compact casing available on the market. This gives an exceptional efficiency compared to conventional rotary exchangers with the same casing dimensions.
The casing is manufactured from Aluzinc or galvanized steel and provides high torsional rigidity.
The airflows may be oriented as side by side or top/bottom, and the complete rotor may be installed in a vertical as well as in a horizontal orientation.
Air leakage between wheel and casing is minimized with a brush seal allowing easy adjustment, longer lifetime and low friction. The two airstreams are also separated by adjustable brush sealants.
Model E complies with the hygiene standards for comfort ventilation EN13779 and meets the requirements for Ecodesign Lot 6. Model E is certified according to Eurovent and AHRI
ROTARY WHEEL HEAT EXCHANGER MODEL – EQ
Model EQ is a high-performing, segmented rotary heat exchanger in a robust galvanized steel casing for industrial and marine ventilation applications. Typical temperature efficiencies are up to 90%.
Thanks to its segmented wheel Model EQ facilitates onsite installation or replacement in narrow spaces. It also provides for lower transportation costs.
It is possible to make adjustments to the position of the shaft in all directions for a perfectly balanced fit in the air handling unit.
Air leakage between wheel and casing is minimized with a brush seal allowing easy adjustment, longer lifetime and low friction. The two air streams are also separated by adjustable brush sealants.
Model EQ is certified according to Eurovent and AHRI.
